DO NOT attempt to change nozzles while pressure washer is
running. Turn engine off before changing nozzles.
1.Pull quick connect coupler back and insert nozzle.
2.Release quick connect coupler and twist nozzle to make sure it is secure in
coupler.
Risk of injury.Ensure nozzle is completely inserted in QC
socket and QC snap ring is fully engaged (forward) before squeezing gun trigger.
0°nozzle-red. This nozzle delivers a pinpoint stream and is
extremely powerful. It covers a very small area of cleaning. This
nozzle should only be used on surface that can withstand this
high pressure such as metal or concrete. Do not use on wood.
15°nozzle-yellow. This nozzle delivers a powerful 15
degree spray pattern for intense cleaning of small areas. This
nozzle should only be used on areas that can withs- tand the
high pressure from this nozzle.
25°nozzle-green. This nozzle delivers a 25 degree spray pattern
for intense cleaning of larger areas. This nozzle should only be
used on areas that can withstand the pressure from this nozzle.
To Next Page
Loading...
