To Next PageTo Next Page
Need help?Do you have a question about the VEVOR MSB43SHSS and is the answer not in the manual?
General| Type | Pole Saw |
|---|---|
| Power Source | Gasoline |
| Engine Displacement | 42.7 cc |
| Engine Type | 2-stroke |
| Fuel Type | Gasoline |
| Fuel Ratio | 25:1 |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.05 inch |
| Fuel Tank Capacity | 1.2 liters |
The main pole section equipped with the handle for operation.
Multiple pole sections used to extend the reach of the saw.
A pole section specifically designed for joining other pole segments.
The component that attaches to the saw blade and the extension pole.
The sharp cutting edge designed for trimming branches.
Unpack the product and verify all listed components are present before assembly.
Secure the saw blade to the saw handle using screws and bolts.
Connect the extension pole sections and attach the pole with handle.
Final step of the assembly process.
Exercise caution when installing and using the sharp saw blades.
Avoid destructive testing to prevent pole connector fracture due to aluminum construction.
Ensure all screws are tightened during installation to prevent blade loosening.
Disassemble and store the product cleanly and safely after use.
Horizontal bending of the telescopic pole is normal and not a quality issue.
