EasyManua.ls Logo

VEVOR NL9 - Page 10

VEVOR NL9
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 9 -
are too warm
recently
·The refrigerator has been disconnected for a long
time
Food is frozen
·The temperature was set too low
There is"water
flow" noise from
inside the
refrigerator
·It's a normal phenomenon,caused by the flow of
refrigerant.
There are
waterdrops
around the
refrigerator casing
or door gap
·It's a normal phenomenon,the moisture will
condense to water when it touches a cold surface
of the refrigerator.
The compressor is
slightly noisy when
starting
It's a normal phenomenon,the noise will be reduced
after the compressor works stably
Code F1displayed
·Possible cause:low voltage to fridge.
Adjust the battery protection from High to Medium or
from Medium to Low
Code F2 displayed
·Possible cause:condenser fan is overloaded.
Disconnect power to fridge for 5 minutes &re-start.
If the code shows again,contact manufacturer for
service
Code F3 displayed
·Possible cause:the compressor starts too
frequently
Disconnect power to fridge for 5 minutes &re-start
lf the code shows again,contact manufacturer for
service
Code F4 displayed
·Possible cause:compressor not kicking in
Disconnect power to fridge for 5 minutes &re-start.

Related product manuals