f the code shows again,contact manufacturer for
service
·Possible cause:overheating of the compressor
&electronics Disconnect power to fridge for 5
minutes &re-start.
f the code shows again,contact manufacturer for
service
·Possible cause:no parameter can be detected by
the controller Disconnect power to fridge for 5
minutes &re-start
If the code shows again,contact manufacturer for
service
·Possible cause:temperature sensor is faulty
Contact manufacturer for service
1. If equipped with a backup battery, you can maintain any temperature you
set under any circumstances without worries.
2. When placing ice cream, please adjust the temperature to the lowest; it
must be powered on for a long time.
3. Prevent the health problems of drinking bottled water caused by high
temperatures.
To Next Page
Loading...
