4. Install the planting basket and planting sponge. (soak the sponge in water for 5
minutes) Then put the seeds in it. (To ensure normal germination, it is recommended
to soak the seeds in warm water for about 1 hour before sowing them in the planting
sponge.) Then, put the basket into the water tank lid.
5. Insert the adapter, then press the power button, the light will turn on, and the machine will
start working. It will automatically turn on for 12 hours and off for 12 hours. This cycle setting
only occurs when the cycle function is turned on.
Note 1: Make sure your hands are dry
before inserting the adapter.
Note 2: Light is not needed before the
seeds germinate, please turn on the light
after the seeds have germinated.
To Next Page
Loading...
