VEVOR SD-25 - User Manual

Support and E-Warranty Certificate https://www.vevor.com/support
WIRE STRIPPING MACHINE
INSTRUCTION MANUAL
We continue to be committed to providing you with tools at a competitive price. "Save Half",
"Half Price" or any other similar expressions used by us only represent an estimate of
savings you might benefit from buying certain tools with us compared to the major top brands
and do not necessarily mean to cover all categories of tools offered by us. You are kindly
reminded to verify carefully when placing an order with us if you are actually saving half
compared to the top major brands.

Summary

Technical Parameters

Parts List

Accessories

Operation Instructions

Feeding Hole and Wire Diameter Selection

Select the correct feeding hole based on wire diameter for optimal stripping.

Incoming Board and Blade Alignment

Select the appropriate incoming board and ensure blade/gear collinearity for effective stripping.

Blade and Feeding Plate Adjustment

Adjust blade height for clean stripping and feeding plate for wire type.

Rolling Gear Configuration

Adjust rolling gears based on wire diameter for proper stripping operation.

Troubleshooting and Operation Modes

Address common issues and learn manual and electric drill operation methods.

Electric Drill Operation

Steps for attaching and detaching the electric drill for powered operation.

VEVOR SD-25 Specifications

General

Model	SD-25
Power	2.2 kW
Voltage	220V
Max. Cutting Thickness	25 mm
Frequency	50 Hz
Phase	Single-phase