VEVOR SD-002 User Manual (English)

To Next Page

Support and E-Warranty Certificate https://www.vevor.com/support

WIRE STRIPPING MACHINE

INSTRUCTION MANUAL

We continue to be committed to providing you with tools at a competitive price. "Save Half",

"Half Price" or any other similar expressions used by us only represent an estimate of

savings you might benefit from buying certain tools with us compared to the major top brands

and do not necessarily mean to cover all categories of tools offered by us. You are kindly

reminded to verify carefully when placing an order with us if you are actually saving half

compared to the top major brands.

Need help?

Do you have a question about the VEVOR SD-002 and is the answer not in the manual?

VEVOR SD-002 Specifications

General

Select the appropriate feeding hole based on the wire diameter for optimal stripping.

Ensure the blade center is collinear with the rolling gear center for precise cutting.

Adjust blade height and feed plate for wire thickness to prevent damage and eccentricity.

Separate rolling gears for wires exceeding 20mm diameter; no separation needed for smaller wires.

Address reasons for machine failure, such as wire size, blade alignment, or sharpness.

Instructions for manual operation with a handle and electric drill drive setup.