Operation Panel
Ice making operation:
1.Connect the machine to the power and press the “ON/OFF” button. The
“ice making” indicator will light on.
Through “+”/”-” to increase or decrease ice making time ,which will be
effected at the current cycle .
Press “+” button,if the screen display “1”,means ice making time will be
added 1 min,max time can be added 8min. If press “-” button and display
“-1”,means ice making time will be decreased 1min,the max time is 5
min. That means the time can be adjusted from -5 to 8 min.
2.When the countdown of time is finished, the “melting” indicator will light
on. The ice cubes will come off the freezing panel later.
3.After the ice cubes come off. The machine will enter another loop of ice
making automatically.
Auto Turning On/Off:
1.When the machine is turned off while connected to the power, press the
“Reservation/Clean” button and the “+”/“-” button to set the auto-turning-on
time (in
hours).The machine will automatically turns on after the countdown
isfinished.
When the machine is at the middle of ice making, press the
“Reservation/Clean” buttonandthe“+”/“-”buttontosettheauto-turning-off
time(inhours).Themachine will automatically turns off after the countdown is
To Next Page
Loading...
