installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception,which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
FASTENERS LOADING METHOD
· Take K- ESG-T64B as an example
a) Pull the pusher back to the end of the magazine. At this time, the pusher should
be hung; (refer to photo 2)
b) Insert the 16Ga finish nail from the rear hole of the magazine and feed it into the
front end of the magazine. Press the button of the pushpin to push the nail to push
the nail forward. (refer to photo 3)
To Next Page
Loading...