Adjustable depth of drive (refer photo 4)
Photo 4
a) Rotate the adjustment knob counterclockwise. At this time, the bumper moves
toward the tip of the gun, and the nail will float out of the surface of the board;
b) Rotate the adjustment knob clockwise. At this time, the bumper moves toward
the handle, and the nail will sink into the surface of the board.
Selectable drive - Choose either sequential or single fire mode
(photo 4)
a) Switch to “T”— Single fire mode；
b) Switch to “TTT”— Sequential fire mode
Dry fire defense
When there is no nail in the magazine or the specified number of remaining nails,
the nail gun will not fire again to remind the operator to continue to put the nail
Photo 5
To Next Page
Loading...