1. To preserve battery life, set the power switch to OFF position to turn off the
detector when the detector is not in use.
2. If the detector can not operate normally, a possible cause is that the battery is
exhausted.
3. Protect the plug of the search coil cable from damp; otherwise the detector may
lose its detecting ability. Dry the plug as needed.
4. The control box is not waterproof. Protect the control box from water, and do not
use the detector in rain.
5. Do not place the detector in any high temperature environment.
6. Do not tamper with the circuit of the detector.
7. Do not pull the search coil cable with force.
8. Handle the detector gently. Do not bump, drop or abuse the detector.
9. When you turn the knob, do not apply excessive force.
To Next Page
Loading...
