Warning-To reduce the risk of injury, user must read instructions
manual carefully.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause
harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
This cable locator is a portable instrument designed to detect or trace conductors.
It consists of a transmitter and a receiver. The signal generated by the transmitter
is a modulated current which generates an electromagnetic field around the
conductor connected. This electromagnetic field induces a voltage within the
receiving coil of the receiver. Then the induced voltage is amplified, decoded, and
converted by the receiver, and finally indicated on the receiver screen.
Features:
Finding cable in wall, line interruption, or short-circuit in a line.
Tracing a cable that is in soil.
Detecting fuse or circuit breaker and assigning current circuits.
Tracing socket or distribution socket that has accidentally been covered by
plastering.
Detecting interruption or short-circuit in floor heating.
Tracing metallic water and heating piping.
Various applications in both voltage-free and live systems.
The screen of the transmitter indicates the transmission level, the
transmission code, and the foreign voltage.
To Next Page
Loading...
