The screen of the receiver indicates the reception level and the transmission
code.
Mains voltage detection by using the receiver.
Automatic and manual sensitivity adjustment of the receiver.
Acoustic signal indication of the receiver may be turned off.
Illumimation function.
Automatic power-off.
Backlight.
Supply list:
One transmitter.
One receiver.
Two test leads.
Two test leads that have a probe.
Two alligator clips.
1 ground stake.
One carrying bag.
One manual.
Adhere to local and national safety codes. Individual protective equipment
must be used to prevent shock and arc blast injury where hazardous live
conductors are exposed.
Do not operate the instrument where explosive ( or combustible ) gas, vapor
or dust is present.
Use caution when working with voltage above 30V ac rms, 42V peak, or 60V
dc. Such voltages pose a shock hazard.
To avoid electric shock, do not touch any naked conductor with hand or skin;
and do not ground yourself while using the instrument.
Do not use the instrument if it is damaged or operates abnormally.
Inspect the test leads for damaged insulation or exposed metal. If a test lead
is damaged, replace it with a new one of the same ratings before use.