VEVOR WT-0240 - Maintain and Storage

To Next Page

To Previous Page

MAINTAIN AND STORAGE

1. Please use mild detergent and water for cleaning.

2. Don't scrub with hard objects like brushes.

3. Dry before storage.Do not store in a dark, damp place.

4. Clean the debris at the filter port in time to avoid clogging.

5. If the barrel body is damaged, it can be repaired with the attached patch (Please

bring your own glue).

6. If the joint is leaking, tighten the joint or wrap waterproof tape(Provide for

yourself) on the thread of the joint before installing it(As shown below).

Note: If you install and remove the connector yourself and the switch is not vertical,

try increasing the number of winding laps of waterproof tape.