To Next PageTo Next Page
Need help?Do you have a question about the Vexar C42MW and is the answer not in the manual?
General| Model | C42MW |
|---|---|
| Fuel Type | Electric |
| Power Source | 120V AC |
| Remote Control | Yes |
| Thermostat | Yes |
| Timer | Yes |
Emphasizes the importance of keeping the manual for installation and parts information.
Critical warnings about improper installation, usage, and clearances to prevent hazards.
Essential safety tips for operation, including fire hazards, children, and fuel types.
Guidelines for choosing a safe location and maintaining required clearances from combustibles.
Instructions for framing the opening, securing the fireplace, and using an ember protector.
Details on fabricating and installing a hearth extension to protect floors from heat.
Specifies clearances for combustible materials around the fireplace opening and louvers.
Instructions for installing an optional fan or blower kit for improved air circulation.
Information on installing an optional kit to provide outside combustion air to the fireplace.
Details on the types of double-wall chimney pipe segments and their lineal gain.
Step-by-step instructions for assembling the double-wall chimney system securely.
Guidance on installing elbow offsets for routing the chimney, including support and length limitations.
How to install firestop spacers to maintain required clearances when penetrating surfaces.
Procedures for cutting roof openings and installing flashing for proper weatherproofing.
Instructions for applying storm collars to seal the chimney pipe against the flashing.
Guidelines for installing chimney systems within a chase, including spacing for multiple units.
Ensures termination height meets code requirements relative to roof features within a 10-foot radius.
How to finish the area around the fireplace with combustible or noncombustible materials.
Step-by-step guide for connecting a gas line, including knockout removal and sealing.
Instructions for operating glass doors, warming the glass, and cleaning it properly.
How to use the damper handle to control airflow within the firebox for safe operation.
Contact information and procedures for obtaining technical assistance or warranty service.
Information on the adjustable hood, required for vent-free gas logs.
Details on the optional bi-fold glass door accessory available in different finishes.
Specific parts like 30° offset and return sections for chimney routing.
Storm collars for sealing various round top termination types.
Firestop spacers are used to maintain required clearances when penetrating surfaces.
Installation of an outside air kit through a side wall for combustion air.
Information about the optional fan kit (BK3) for circulating air.
Installation of an outside air kit through the floor for combustion air.
Various round top terminations for chimney venting, with and without slip sections.
Square chase-top and econo-top terminations for chimney systems installed in chases.
