19
OPEN WATER OPTIONS
Universal Open Water Transducer Mounting Kit: TK-100
Year-round shing use of any Vexilar Flasher sonar system is made a lot easier and less expensive with the
Universal Open Water Transducer Mounting Kit from Vexilar. This kit includes a 20-degree transducer with
thirty feet of cable and the mounting brackets needed to attach it to the side of a boat with a suction cup
mount, an electric trolling motor mounting bracket or an external high-speed mounting bracket.
IMPORTANT: Suction cups can come loose. Each bracket includes a safety
rope. Be sure to take the time to tie the rope to the bracket and then to
the boat leaving as little amount of slack as you can. If the cup(s) come
loose, this will keep your transducer and cable out of the propeller.
BK0044
High Speed Suction Cup Bracket
Fits all High-Speed Transom style transducers
and allows for readings at speeds above the
planing speed of the boat. Dual suction cups
oer a secure hold.
BK0027
Fits all 2" Puck style transducers. (9°, 12°, and
dual 9°/19°). Oers a secure hold and the ability
to point the transducer in a specic direction.
BK0023
Fits the 1" (19°) Puck Transducer. This bracket
makes it the smallest portable transducer option
available.
Permanent Mount Kits
Application specic TK Kits are also available.
Choose from puck style for in-hull or electric
trolling motor mounting, or the high-speed
style for mounting to the transom of your
boat. Both transducer styles come in a variety
of beam angle options.
These kits contain everything needed for
installation. See page 72 for a list of kits
available.
To Next Page
Loading...
Need help?
General
