VR-N7500 Fast Operate Manual
Section I: How To Connect VR-N7500 With Cell-phone
Hand microphone status description:
Section II:How To Connect to Bluetooth Accessories?
Section III:How To Edit the frequency？
Section Ⅳ: Frequency display
1，For Android user
Scan the QR code to download the HT APP
or visit the website:
http://www.vgc.net.cn/download/22-en.html
For IOS user
Search 'BS HT' in APPLE store to download
2，Open the app, select-[BIND NEW DEVICE]. Turn-on the mobile radio, then press POWER key twice,
a 'BEEP' will be heard and red-green light flashing means the radio is now in pairing status
3，Select the scanned device then bind it
4，Some mobile phone Bluetooth pairing requires authorization, so check the phone menu,
select to confirm Bluetooth pairing can be paired successfully.
MUST
【M buttons】
Short press：Channel/Volume switch
Long press： Talk around function
Double press： Mute
【Up/Down button】 【PTT button】
Short press： Push to talk
Channel mode： Channel adjust
Volume mode： Volume adjust
【OK button】
Short press： Current channel prompts
1，Connect to Bluetooth PTT
Turn-on the mobile radio, then press【 POWER】 key twice, a 'BEEP' will be heard. Long press the
bluetooth PTT,
2，Connect to Bluetooth speaker mic
Turn-on the mobile radio, then press 【 POWER】 key twice, a 'BEEP' will be heard. Turn on the bluetooth
speaker mic, double press to enter pairing status.
red-green light flashing means the bluetooth PTT is now in pairing status
Turn on the APP,Long press the channel square,
then seclect【 Edit Channel】，When you edit the
completion channel parameters ,click 【 save】to
save the Channel Parameters.
When the frequency setting is completed, make the phone horizontally display, and the frequency will
be displayed on the map interface (the arrow up means TX and the arrow down means RX)
To Next Page
Need help?
General