PACKING INSTRUCTIONS
Inspect your 2150/Classic amp for hidden damage that may have occurred in transit.
Your amp was inspected and sound-tested before shipment from the factory. All claims
for shipping damage must be made by the receiver. Save your box and packing material
for evidence of damage if it has occurred.
The original box and packing materials are specifically designed to protect your amp dur-
ing shipment. SAVE ALL PACKING MATERIALS. In the unlikely event that your amp
needs to be returned to the factory, the original box and packing materials will be neces-
sary for shipment. These are carrier-approved packing materials, and they will ensure
safe transit back to the factory.
SAFETY CAUTIONS & WARNINGS
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE. DO NOT OPERATE NEAR WATER. ALWAYS USE THE PROVIDED POWER CORD.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to per-
sons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
TUBE LOCATION CHARTS
UNPACKING
PACKING
MATERIALS
KT88/6550A
12AT7
12AX7A
CLASSIC
2150
12AT7
12AX7A
6CA7/EL34
KT88/6550A
6CA7/EL34
6CA7/EL34
6CA7/EL34
1
To Next Page
Loading...