VIA Technologies VT1723 User Manual

MN4000000059 Page3
 1 x User Manual
Note: Contents may vary depending on the market/country.
Hardware & Software Installation
It is recommended that you remove any previously installed sound card
and drivers prior to installing this 7.1 Channel PCI Sound Card to
avoid any conflicts. If previously installed drivers are not removed, this
7.1 Channel PCI Sound Card perhaps not function properly. (Note: If
your computer has on-board sound you will need to disable it on the
motherboard. For more information please see your computer’s
documentation or contact your computer’s manufacturer.)
Driver Installation
For Windows® 2000, XP/2003/Vista/7 (32/64 bit)
1. Locate an available PCI slot on your computer, and insert this 7.1
Channel PCI Sound Card into the slot. Fasten the card to the case
using a screw.
2. Start your PC, place the Driver CD into the CD-ROM drive.
Click the Start button on the taskbar and click Run. Type
“D:\SOUND\VT1723\Setup.exe”. (Assuming you have placed

VIA Technologies VT1723 Specifications

General

Brand	VIA Technologies
Model	VT1723
Category	Sound Card
Language	English