25
Information for customer
Packaging identification
PE Plastic sacks, folie, corrugaled board, iron and plastic fix
line
Assessment reference
Identification of principal materials used. Paper, Polyethylene, iron, wood
Part 1: Summary of assessment
Standard/Report Assessment requirement Claim Note
1.1 Prevention by source
reduction
YES
1.2 Heavy metals and ensure below maximum permitted
levels for components
(CR 13695-1:2000)
YES
1.3 Other
noxious/hazardous
substances
ensure in compliance with
(CR 13695-2:2002, EN 13428:2000)
YES
2 Reuse ensure reusability in all terms of the
standard for the functional packaging
unit (EN 13429:2000)
NO
3.1 Recovery by material
recycling
ensure recyclability in all term sof the
standard for the functional packaging
unit (EN 13430:2000)
YES
3.2 Recovery in the form
of energy
ensure that calorific gain is achievable
for the functional packaging unit
(EN 13431:2000)
YES Iron - NO
3.3 Recovery by
composting
ensure compost ability in all terms of
the standard for the functional
packaging unit (EN 13432:2000)
NO
NOTE Conformity with EN 13427 requires affirmative responses to sections 1.1; 1.2; 1.3 and to at
least one of 3.1; 3.2; 3.3. In addition, where a claim of reuse is made section 2 should also
record affirmative responses.
Part 2: Statement of conformity
In the light of the assessment results recorded in part I above, this packaging is claimed to comply
with the requirements of EN 13427:2000.
CALOR SRL
Str. Progresului nr. 30-40, sector 5, Bucuresti
tel: 021.411.44.44, fax: 021.411.36.14
www.calorserv.ro - www.calor.ro
To Previous Page
Loading...
