Need help?Do you have a question about the Viadrus K4 and is the answer not in the manual?
Details different boiler models and their configurations.
Explains the boiler's suitability and advantages for heating.
Provides detailed specifications, dimensions, and operational parameters.
Describes the boiler's construction, materials, and burner system.
Explains the boiler's control panel and basic functions.
Step-by-step guide on how to remove the boiler's front cover.
Identifies and labels the key components of the boiler assembly.
Illustrates the path of flue gases through the heat exchanger.
Lists standard and recommended accessories included with the boiler.
Outlines essential steps before the initial startup of the boiler.
Guides users on how to operate and monitor the boiler.
Explains the boiler's control panel display and button functions.
Details the different operating modes available for the boiler.
Lists and explains error codes that indicate a lockout condition.
Explains temporary blocking codes that do not cause lockout.
Covers extra features like LCD tests and air purge.
Describes how to test the boiler's LCD display symbols.
Explains the function to remove air from the heating system.
Details communication protocols with external controls.
Information on accessing and viewing the boiler's operational history.
Access and navigation for installer-specific settings.
Explains how to use the Transparent Parameters mode for configuration.
Details how to access sensor readings and system status.
Instructions for viewing historical fault and operation data.
How to reset the boiler's historical data.
General maintenance procedures and recommendations for the user.
Critical safety warnings and operational guidelines for users.
Guidance on how to dispose of the boiler at the end of its lifespan.
Details warranty terms, conditions, and exclusions.
Lists applicable standards and regulations for boiler installation.
Provides guidelines on where the boiler can be safely installed.
Step-by-step instructions for mounting and connecting the boiler.
Instructions for filling the heating system and connecting to it.
Procedures for safely connecting the boiler to the gas supply.
Guidelines for connecting the boiler to the electrical power source.
Details on how to connect the condensate drain and its requirements.
References the section on flue gas ducting.
Information regarding the boiler's electrical wiring system.
Identifies the main electrical components within the boiler.
Explains how to connect external controls and sensors.
Shows wiring diagrams for different boiler connection terminals.
Explains boiler versions classification and general flue gas requirements.
Illustrates examples of proper flue gas and air supply connections.
Shows examples of incorrect flue gas and air supply connections.
Details the connection for STARR D80 and FLEX 80 flue systems.
Provides a diagram for the STARR 2x D 80mm flue ducting system.
Shows a diagram for the FLEX 2x D 80mm flue ducting system.
Explains the connection for LIK 60/100 and 80/125 flue systems.
Provides a diagram for LIK type flue gas ducting configurations.
Lists pressure losses for various chimney flue elements.
General compliance and procedural requirements for boiler commissioning.
Step-by-step guide for preparing the boiler before its first operation.
Instructions for adjusting boiler parameters, including emissions and fan speed.
Information on converting the boiler for different fuel types.
Details on adjusting boiler electronic parameters.
Factory settings for Honeywell electronics for K4GXH24X models.
Factory settings for Honeywell electronics for K4GXH33X models.
Key points and procedures for annual boiler servicing and inspection.
Summary of packaging assessment requirements and results.
To Next Page
General
