Need help?Do you have a question about the Viavi FVAm Series and is the answer not in the manual?
General| Brand | Viavi |
|---|---|
| Model | FVAm Series |
| Category | Microscope |
| Language | English |
Warning about maintaining separation distance from antennas to comply with RF exposure requirements.
Guidance on proper disposal of product and batteries according to EU directives.
Information on REACH regulation concerning Substances of Very High Concern (SVHC).
Confirmation of product conformity with applicable CE marking directives.
Details about the software used for capturing, analyzing, and grading fiber end-face images.
Information on how to order the FVAm microscope kits and accessories, including part numbers.
Guidance on accessing technical support and the VIAVI Solutions Knowledge Base.
Overview of the physical components and capabilities of the FVAm microscope.
Explanation of the Auto Focus/Inspection Trigger button and the meaning of its LED indicators.
Step-by-step instructions for safely powering the FVAm microscope on and off.
Information on the magnetic adapters used for connecting fiber connectors to the microscope.
Details on the markings and alignment keys of FMAG adapters.
Instructions on how to attach and orient FMAG adapters on the microscope.
Instructions on how to detach FMAG adapters from the microscope.
Procedure for connecting standard fiber connectors to the microscope.
Procedure for connecting QSFP/CFP modules with MT ferrules, including ESD precautions.
Explanation of how to access and navigate the microscope's settings menu.
Description of how to view live images of fiber end faces on the touchscreen.
Explanation of the on-screen meter indicating focus quality.
How Pass/Fail test results are displayed and the available overlay modes.
Using controls to move the view across the fiber array.
Using on-screen controls to digitally pan the image.
Using the Y-axis dial to center fiber end faces.
Steps to configure tests via the FiberChekPRO software.
Steps to configure tests using the microscope's touchscreen interface.
Procedure for adding user details via the FiberChekPRO software.
Procedure for adding user details via the microscope's touchscreen.
How to create or select an active group for saving results.
Prerequisites and conditions before starting a Pass/Fail test.
Step-by-step guide to initiating a test using the FiberChekPRO software.
Step-by-step guide to initiating a test using the microscope's controls.
Procedure for modifying optical settings via the FiberChekPRO software.
Procedure for modifying optical settings via the microscope's interface.
Step-by-step process for defining new connector configurations.
Steps to transfer test results from the microscope to a PC using FiberChekPRO.
Steps to remove test data from the microscope's storage.
Configuration for connector types used in Pass/Fail tests.
Process for creating groups to organize test results.
Setting up user-specific information for reports.
Accessing previously saved images.
Modifying microscope optical parameters.
Adjusting live view, auto-focus, and test parameters.
Configuring language, date/time, and power options.
Step-by-step guide to download and install new firmware versions.
Detailed steps to revert the microscope firmware to an earlier version or factory state.
To Next Page
