Viavi OneAdvisor ONA-800 User Manual

Page 1 of 15
Technical Support tac@viavisolutions.com 1-844-468-4284 option 3, 1, 1
Viavi OneAdvisor ONA-800
Software Update Instructions
May 1, 2020
Table of Contents
Scope ................................................................................................................................................................ 2
1. Network Upgrade ..................................................................................................................................... 2
2. USB Upgrade…………………………………………………………………………………………….8
3. Stratasync Upgrade……………………………………………………………………………………..13

Viavi OneAdvisor ONA-800 Specifications

General

Connectivity	Wi-Fi, Bluetooth, USB, Ethernet
Display	10.1-inch touchscreen
Measurement Types	Optical, RF, Ethernet
Supported Technologies	5G
Test Capabilities	cable and antenna testing
Power	AC adapter, rechargeable battery
Interface	Ethernet

Summary

Network Upgrade Procedure

Initial Device Setup

Power on the device, connect AC power, and establish LAN connection.

Network Settings Configuration

Access System Menu and configure LAN IP mode (DHCP or Static).

Executing Network Upgrade

Select Network Upgrade, connect to server, and initiate the software update.

USB Upgrade Procedure

Download and Prepare USB

Download software to PC, then save to a USB flash drive.

Extract Files and Eject USB

Extract downloaded files to the USB drive and safely eject it.

Perform USB Upgrade

Connect USB to ONA-800, select USB method, and start the upgrade.

StrataSync Upgrade Procedure

Initial Setup for StrataSync

Power on, connect AC power, and establish LAN connection.

Network Configuration for StrataSync

Configure LAN settings and access StrataSync settings.

Initiate StrataSync Synchronization

Ensure Account/Technician IDs match, then sync the ONA-800.