Need help?Do you have a question about the Viavi OneExpert CATV and is the answer not in the manual?
General| Model | OneExpert CATV |
|---|---|
| Return Path Frequency Range | 5 MHz to 204 MHz |
| Battery Life | Up to 8 hours |
| MER Range | 30 dB to 40 dB |
| Measurement Types | MER, BER |
| Display | Color LCD |
| Connectivity | USB, Ethernet, Wi-Fi |
Provides instructions on setting up the instrument, including international settings, date/time, and power configurations.
Covers setting up wired and wireless connections for firmware updates, file transfer, and remote control.
Provides instructions for upgrading the instrument's software and firmware via StrataSync, network, or USB.
Explains how to synchronize the instrument with the StrataSync server for asset management and data backup.
Details how to access, select, open, copy, paste, and upload files stored on the instrument or a USB drive.
Guides on accessing the instrument's interface from a PC via VNC for remote control and operation.
Details how to match test settings to the line under test, including loading profiles and configuring new ones.
Describes the TrueSpeed test for evaluating customer network experience and resolving performance issues.
Provides step-by-step instructions for using the VIAVI P5000i Fiber Microscope to inspect fiber cleanliness and analyze performance.
Describes troubleshooting single connection issues using the WiFi Advisor application for assessment and analysis.
Explains how Limit Plans determine test result Pass/Fail status and how to configure them for different locations.
Details configuring DOCSIS service plans for throughput servers, MAC addresses, and IP performance limits.
Offers solutions for common issues encountered with the OneExpert CATV, covering general and data testing problems.
To Next Page
