Need help?Do you have a question about the Viavi OneExpert ONX CATV 620 and is the answer not in the manual?
General| Return Path Sweep | Yes |
|---|---|
| DOCSIS 3.1 Support | Yes |
| Display | 7-inch touchscreen |
| WiFi | 802.11 a/b/g/n/ac |
| Ethernet | Yes |
| USB | Yes, USB 2.0 host port |
| Operating Temperature | -10°C to +50°C |
| Measurement Types | MER, BER |
| Downstream Measurement | Level, MER, BER |
| Upstream Measurement | Level, MER, BER |
Details the primary input method for device navigation and operation.
Explains the function of physical shortcut, hard keys, directional, and utility buttons.
Details the button for powering the device on and off.
Describes the RF Ingress Port for upstream connection and Ingress Scan.
Details the RF port for US/DS Analysis (DOCSIS, QAM).
Explains the dual Ethernet ports and USB ports for connectivity.
Identifies the port for charging the device battery.
Explains the DC power input and the charge status LED indicators.
Details the function of the system keys for navigation and control.
A multi-color LED indicating battery charge status and error conditions.
Lists and describes functions like Save, View, Screenshot, Network, Bluetooth, Volume, Help.
Explains how to access the tray menu via key press or swipe.
Explains collapsible menus and how to create shortcuts for functions.
Enables remote control and adjusts power/screen display settings.
Covers the process for completing USB software updates.
Explains IP connection and VNC Viewer for remote control.
Benefits of remote operations and app features like tutorials.
Settings for channel plan build and digital measurement parameters.
Configuration for OneCheck, including BER and ChannelCheck.
Ensures optimal function; delivered via StrataSync and USB Stick.
Steps to ensure meter configuration for receiving updates via StrataSync.
Steps to download firmware from StrataSync and copy to a USB drive.
Insert drive, start System Settings, and select USB Software Update.
Select firmware image and press Update to start the upgrade.
Press Update to confirm; meter powers off upon completion.
Connect an Ethernet cable from internet to Port 1 on ONX.
Navigate to System Menu > Network and verify IP address.
Connect with WiFi from an active internet connection.
Navigate to System Network > WiFi and verify IP address.
Access the StrataSync menu via System Menu.
Set Account ID, Interface, Server Address, and Server Port.
Select Start to initiate the update process.
ONX connects to StrataSync to check for available updates.
Software packages are confirmed; select Update.
Steps to resolve issues when there is no IP address.
Confirm Ethernet port, select Ethernet menu, and stop network association.
Press Back button and power cycle the meter.
Step-by-step guide to enable demo mode.
Step-by-step guide to disable demo mode.
Important warning against upgrading ONX CATV in Demo Mode.
Steps to enable engineering mode and run BIST.
Copy the custBist.zip file to a plugged USB memory stick.
Select Ethernet from Home Screen and then Test and Settings.
Configure IP Address/URL for throughput testing.
TrueSpeed is found under Tests and Settings.
Requires TrueSpeed VNF Server IP Address for setup.
Select a profile or create a new one for testing.
Adjust server settings and configure a fallback server.
Performs quick checks, spectrum analysis, and channel checks.
Performs DOCSIS checks, comprehensive testing, and ingress scans.
Enables test correlation and is optional.
Displays error if Work Order ID is not entered before a test.
Comprehensive testing for Ingress, Downstream, and DOCSIS services.
Quick check of manually added channels for signal presence.
Steps from choosing test to inputting work order ID.
Understanding results and how to capture live data.
Unique identifiers are crucial for data analysis.
Provides expert analysis and detailed ingress scan information.
Identifies off-air interferers infiltrating the downstream.
Identifies carrier portions with degradation due to spectrum/noise.
Checklist to ensure no uncorrectable CWEs are present.
Checklist for PLC testing: Level, MER, Lock status, CWE.
Checklist for NCP testing: Lock status, Uncorrectable CWE.
Checklist for Profile A: Lock status, Uncorrectable CWE.
Checklist for Avg level, Avg MER, MER at 2 percentile, MER std dev.
Checklist for PLC, NCP, Profile A, Profile B QAM levels/MER.
Explains total power differences and warns against CMTS adjustment.
Explains power differences and warns against using total power for CMTS adjustment.
DOCSIS Test must be enabled for DOCSIS Service Tests.
To Next Page