Need help?Do you have a question about the Viavi OLP-88 and is the answer not in the manual?
General| Wavelength Accuracy | ± 1 nm |
|---|---|
| Display Resolution | 320 x 240 pixels |
| Battery Life | up to 8 hours |
| Data Storage | up to 1000 measurements |
| Power Accuracy | ±0.15 dB |
| Display | LCD |
| Optical Connector | FC |
| Optical Interface | Singlemode |
| Dimensions | 100 mm |
Details the OLP-88/88P TruePON Tester, its features, and capabilities.
Instructions for the intended use and ambient conditions.
Details about laser radiation hazards and precautions.
Warnings and instructions for battery handling and explosion danger.
Instructions for unpacking the instrument and checking contents.
Warnings regarding battery handling dangers.
Instructions on how to replace batteries.
Instructions on how to turn the instrument on and off.
Explains the function of each key and status LEDs on the control panel.
Overview of the System Settings menu and its items.
Instructions to find and update the instrument's firmware.
Steps to prepare for a TruePON measurement.
Explains the main screen elements of the TruePON application.
How to use OLP-88 for service activation testing.
How to identify and recover from rogue ONU issues.
Steps for automatic certification of service specifications.
How to perform end-to-end loss testing for fiber plant qualification.
How to edit or create location and threshold settings.
How to enable or disable pass/fail evaluations.
Details the PCM microscope for patch cord inspection.
Capabilities of the P5000i Digital Probe for inspection.
General steps to configure the Digital Probe.
Selecting test profiles for connector and fiber end-face analysis.
How results are assigned to projects and FiberIDs.
How to set up and activate Link Data Mode parameters.
How to save current results successively.
Detailed steps for creating projects and activating Link Data Mode.
Overview of memory clearing functions.
Instructions for cleaning the optical test port.
How to clean the instrument using a soft cloth and detergent.
Describes the USB 2.0 interface for remote control.
How to select specific applications for remote commands.
Commands for Probe and PCM applications.
Commands used with the :PONEXTENDED prefix.
Commands used with the :SYSTEM prefix.
Commands used with the :PMGNT prefix.
Lists common error messages and their codes.
General functionality of the instrument.
Features for G-PON data analysis.
Fiber inspection capabilities.
Detailed technical specifications of the instrument.
Specifications for FTTx measurements.
Specifications for upstream and downstream power measurements.
Pass-through insertion loss and power uncertainty.
General technical specifications like display, memory, interfaces.
Specifications for the patch cord microscope.
Product codes for OLP-88 and OLP-88P units.
To Next Page