Need help?Do you have a question about the Viavi SmartPocket OLP-39G and is the answer not in the manual?
General| Resolution | 0.01 dB |
|---|---|
| Wavelength | 1310 nm, 1550 nm |
| Power Range | +10 to -70 dBm |
| Measurement Range | +10 to -70 dBm |
| Display | LCD |
| Supported Fiber Types | Single-mode |
| Storage Temperature | +70 °C |
| Interfaces | USB |
Introduction to the OLP-39G/-39X TruePON Tester for PON network qualification and troubleshooting.
Explains warning symbols (Notice, Caution, Warning, Danger) and safety instructions.
Information on safety, disposal, and environmental protection is available in a separate booklet.
Details the power sources for the OLP-39G/-39X, including dry batteries and AC adapter.
Instructions and safety precautions for handling and replacing batteries in the device.
Details the two battery power modes (Permanent ON, Automatic OFF) and how to switch the device.
Details the TruePON mode, including home screen, overview, and detailed results.
Details the Pass/Fail modes (PF Abs, PF Loss) and how to set the fail threshold.
How to start a measurement and recall the last TruePON measurement results from the Home screen.
Step-by-step guide on how to save the current measurement result with date/timestamp.
Instructions on how to browse, open, and view saved measurement data.
Guidance on deleting single or all measurement entries from the device memory.
Using USB and SmartReporter for data transfer, firmware updates, and accessing the latest firmware revision.
Instructions on cleaning the test port and optical connections to ensure accurate measurements.
To Next Page