Need help?Do you have a question about the Viavi Certifier40G and is the answer not in the manual?
General| Brand | Viavi |
|---|---|
| Model | Certifier40G |
| Category | Test Equipment |
| Language | English |
Indicates a hazard and requires adherence to operating procedures to prevent damage or data loss.
Indicates a hazard and requires adherence to operating procedures to prevent personal injury or death.
Details the initial steps for setting up the device, including unpacking components.
Overview of the graphical user interface (GUI) and its updated features.
Explains the layout of the touch screen and the categorization of menus.
Details the main functions accessible via the One-Touch access buttons on the device.
Explains how the AUTOTEST button performs certification tests and the possible results.
Guides on selecting standard limits and adjusting performance criteria for tests.
Explains how to set network testing criteria like maximum loss and Ethernet standards.
Instructions on selecting or creating custom cable profiles for testing.
Explains how refractive index affects light speed and is determined by the fiber cable.
Details how to select modal bandwidth for signaling rate per distance unit for different fiber types.
Covers non-results oriented configurations before performing an AUTOTEST.
Details device type settings, allowing configuration as Local or Remote unit.
Provides archive and data management for saved sites and test results.
Establishes test conditions and excludes reference cords from measurements.
Measures power loss using a light source at specific wavelengths.
Emits light at specific wavelengths to determine loss on a Power Meter.
Performs visual verification of fiber's quality using an external scope probe.
Detailed procedure for setting reference with one jumper in dual-ended configuration.
Steps to configure Site, Operator, Label Source, and AutoSave in Project Settings.
Steps to configure Test Limit, Cable type, and Modal Bandwidth in Test Settings.
Summarizes how to initiate an AUTOTEST and view results (PASS/FAIL).
Explains how to access comprehensive results for single and bi-directional tests.
To Next Page