Need help?Do you have a question about the Viavi T-BERD SC 4800 and is the answer not in the manual?
General| Model | T-BERD SC 4800 |
|---|---|
| Display Size | 7 inches |
| Battery Life | Up to 8 hours |
| Dynamic Range | 45 dB |
| Humidity | 0% to 95% non-condensing |
| Type | OTDR |
| Display | Color LCD |
| Wavelength Range | 1310 nm, 1550 nm |
| Pulse Width | 3 ns to 20 μs |
| Event Dead Zone | 0.8 m |
| Interfaces | USB, Ethernet |
| Optical Testing Capabilities | OTDR, Power Meter, Light Source |
| Connectivity | Ethernet, USB, Wi-Fi, Bluetooth |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C |
Details the instrument's capabilities, including electrical and SONET/SDH interface support.
Details key principles, base unit requirements, and required tools for connecting a DMC.
Explains requirements and steps for inserting MSAM or CSAM modules into base units or DMCs.
Explains how to supply power using the battery or AC adapter and adapter requirements.
Provides guidance on connecting the instrument to test circuits, considering optical connectors.
Explains two methods for selecting test applications: Quick Launch and Test Menu.
Covers displaying setup screens, entering data, and saving test configurations.
Details how to start tests, including turning lasers on and using action buttons.
Explains how to view results, set groups/categories, and change layout.
Contains physical, power, electrical, and timing specifications for these instruments.
Details physical, power, battery, and PIM specifications for the MSAM.
Lists physical, power, battery, and optical interface specifications for the CSAM.
Offers solutions to common problems encountered when using the instrument.
To Next Page