To Next PageTo Next Page
Need help?Do you have a question about the Vibe BlackAir Series and is the answer not in the manual?
General| Configuration | Single |
|---|---|
| RMS Power | 400W |
| Peak Power | 1200W |
| Impedance | 4 Ohms |
| Power Handling | 400W RMS |
| Magnet Weight | 40 Oz |
| Surround Material | Foam |
| Size | 12 inches |
| Voice Coil | 2-inch |
| Basket Material | Steel |
Advises on avoiding moisture, proper wiring, safe driving practices, and hearing protection.
Lists exclusions from warranty coverage, including improper installation and misuse.
Instructs users to contact local dealers for international warranty procedures.
Warns that VIBE equipment can cause permanent hearing damage at high volumes.
Details ownership of manual content, trademarks, and disclaimers of liability.
Illustrates the wiring configuration for achieving a 4-ohm impedance.
Illustrates the wiring configuration for achieving a 1-ohm impedance.
Details the recommended procedure for breaking in the subwoofer for optimal performance.
Details specifications for the BLACKAIR10D2-V7 model, including power and dimensions.
Details specifications for the BLACKAIR12D2-V7 model, including power and dimensions.
Details specifications for the BLACKAIR15D2-V7 model, including power and dimensions.
Provides contact information for UK technical support and guidance for international inquiries.
