iv
Service:
• The casing cover should be opened only by qualied service personnel.
• If there is any need for repair or integration, please contact your local service center.
If your display does not operate normally, having followed the instructions in this document, please
contact a technician or your local service center.
Read and follow these instructions when connecting and using your display:
• Consult a service technician if the display does not operate normally when you have followed the
instructions in this manual.
• The back cover should be opened only by qualied service personnel.
• Keep the display out of direct sunlight and away from stoves or any other heat sources.
• Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
• When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds
before re-attaching the power cable or DC power cord for normal operation.
• To avoid the risk of shock or permanent damage to the set do not expose the display to rain or
excessive moisture.
• When positioning the display, make sure the power plug and outlet are easily accessible.
• This product’s power cord is equipped with a three-wire grounded plug. The plug only ts in a
grounded power outlet. Make sure the power outlet is properly grounded before inserting the power
cord plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for
details.
• IMPORTANT: Always activate a screen saver program during your application. If a still image in
high contrast remains on the screen for an extended period of time, it may leave an ‘after-image’ or
‘ghost image’ on the front of the screen. This is a well-known phenomenon that is caused by the
shortcomings inherent in LCD technology. In most cases the afterimage will disappear gradually over a
period of time after the power has been switched off. Be aware that the after-image symptom cannot
be repaired and is not covered under warranty.
To Next Page
Loading...
