12
Tech. data, maintenance, disposal
5
Before contacting the service office of
the furniture manufacturing company,
please try the following in the event of
a malfunction:
• Check to ensure that the dual drive
VMAT-Basic is connected to the
mains supply (power socket).
• Check (e.g. with a lamp) that the
power socket actually works (fuse).
• Replace the batteries of the radio
transmitter (see page 8).
• Carry out the teach-in process
again (see page 8).
• Reset the dual drive to the default
settings (see page 15) and then
carry out the teach-in process again
(see page 8).
6 Technical data
Operating voltage . . . . . . . . . . . . 3VDC
via batteries
Power consumption
Idle. . . . . . . . . . . . . . . . . . . . . . . . typ.1µA
Operational . . . . . . . . . . . . . . . . . . . 2mA
Transmission freq. . . 2,4GHz (ISM-Band)
Transmission range . . . . . . . . . 10 - 50m
Housing material. . . . . . . . . . . . . . . . ABS
Protection grade . . . . . . . . . . . . . . . IP20
Battery type . . . 2 pcs. 1,5V AAA (LR03)
Weight (incl. batteries and
packaging) . . . . . . . . . . . . approx.. 80g
7 Maintenance and
cleaning
The radio transmitter is maintenance-
free, apart from the replacement of
the batteries.
Clean the housing with a slightly damp
cloth. Do not use any aggressive
detergents or scouring agents.
Malfunctions /
troubleshooting
To Next Page
Loading...
Need help?
General