8
Commissioning
3 Commissioning
3.1 Inserting the batteries
Insert the supplied batteries (2x 1,5V
AAA LR03) into the battery
compartment as shown in the picture.
Ensure that the batteries are inserted
in the right direction (+/-)!
inserted, close the battery
compartment lid again and the radio
transmitter is operational.
Once the batteries have been
3.2 Teach-in process
A teach-in process must be carried
out to enable the radio transmitter
and the dual drive V-MAT-Basic to
communicate with each other.
This teach-in process is normally
carried out by the manufacturer and
you can skip this step.
To Next Page
Loading...
Need help?
General