9
1 2
3
l
5
Commissioning
• Press button on the dual drive for
approx. 1 s.
l
• Now press the buttons and on
the radio transmitter at the same
time and keep them pressed until
the dual drive acknowledges the
teach-in by moving briefly the head
and foot part.
1 2
If the teach-in process was not
successful (head and foot part do not
move), repeat the above process
again.
• Reset the radio transmitter to factory
settings by pressing buttons ,
and for approx.
8 seconds.
1 3
5 at the same time
To Next Page
Loading...