What to do if fault light is continuously on Vibration Research VR9500 Controller?
If the fault light is continuously on while the status light is continuously off in your Vibration Research Controller, try turning the power off and then back on to reset the unit.
How to fix power light if it fails to illuminate on Vibration Research Controller?
If the power light on your Vibration Research Controller fails to illuminate, verify that the power cord is plugged into a live outlet and the power switch is on.
General| Input Voltage | ±10 V |
|---|---|
| Resolution | 24-bit |
| Input Voltage Range | ±10 V |
| Output Voltage Range | ±10 V |
| Interface | USB, Ethernet |
| Maximum Output | ±10 V |
| Dynamic Range | 120 dB |
| Control Algorithms | Shock |
| Operating System Compatibility | Windows 7, 8, 10 (32-bit and 64-bit) |
To Next Page
