Do you have a question about the Vicks V1200 and is the answer not in the manual?
Ensure unit is on a firm, flat, waterproof surface and cord is out of the way to prevent tipping.
Inspect cord, use polarized plug correctly, plug directly into 120V AC, unplug with dry hands, avoid extension cords.
Do not use while bathing, sleepy, or in certain areas; do not operate without water; never add medications.
Diagram labeling Inhaler Hood, Vent Assembly, Water Reservoir, Base, Flow Levers, and controls.
Unravel cord, place on stable surface, remove Inhaler Hood, and detach Vent Assembly.
Fill Water Reservoir, replace Vent Assembly and Inhaler Hood, connect to power.
Turn on, wait for steam, adjust flow levers, position face, and inhale for 5-15 minutes.
Turn off, unplug, allow to cool before moving or refilling.
Move Vent Lever clockwise towards 'HI' for more steam and higher temperature.
Move Vent Lever counterclockwise for lower steam flow and temperature.
Use Vicks VapoPads or Kaz Inhalant Pads for soothing vapors; insert into vent assembly.
Remove and wipe dry Inhaler Hood and Vent Assembly; wipe Reservoir and Base.
Clean Reservoir with vinegar, wash Inhaler Hood with mild soap.
Follow Weekly Maintenance instructions before next use.
Inhaler is compact, dual voltage (120-240V), may require plug adapter.
Covers defects in material/workmanship for one year; excludes shipping and consequential damages.
Contact Consumer Relations for troubleshooting, questions, or repairs via phone, email, or website.
Provides relief for cough, colds, congestion, and sore throat.
Details on Vicks VapoPads and Kaz Inhalant Pads, including ingredients and recommended usage.
Information on purchasing Vicks VapoPads and Kaz Inhalant Pads.
Mail, phone, and email details for questions, comments, and ordering parts.
Ensure unit is on a firm, flat, waterproof surface and cord is out of the way to prevent tipping.
Inspect cord, use polarized plug correctly, plug directly into 120V AC, unplug with dry hands, avoid extension cords.
Do not use while bathing, sleepy, or in certain areas; do not operate without water; never add medications.
Diagram labeling Inhaler Hood, Vent Assembly, Water Reservoir, Base, Flow Levers, and controls.
Unravel cord, place on stable surface, remove Inhaler Hood, and detach Vent Assembly.
Fill Water Reservoir, replace Vent Assembly and Inhaler Hood, connect to power.
Turn on, wait for steam, adjust flow levers, position face, and inhale for 5-15 minutes.
Turn off, unplug, allow to cool before moving or refilling.
Move Vent Lever clockwise towards 'HI' for more steam and higher temperature.
Move Vent Lever counterclockwise for lower steam flow and temperature.
Use Vicks VapoPads or Kaz Inhalant Pads for soothing vapors; insert into vent assembly.
Remove and wipe dry Inhaler Hood and Vent Assembly; wipe Reservoir and Base.
Clean Reservoir with vinegar, wash Inhaler Hood with mild soap.
Follow Weekly Maintenance instructions before next use.
Inhaler is compact, dual voltage (120-240V), may require plug adapter.
Covers defects in material/workmanship for one year; excludes shipping and consequential damages.
Contact Consumer Relations for troubleshooting, questions, or repairs via phone, email, or website.
Provides relief for cough, colds, congestion, and sore throat.
Details on Vicks VapoPads and Kaz Inhalant Pads, including ingredients and recommended usage.
Information on purchasing Vicks VapoPads and Kaz Inhalant Pads.
Mail, phone, and email details for questions, comments, and ordering parts.
| Type | Cool Mist Humidifier |
|---|---|
| Model | V1200 |
| Tank Capacity | 1.2 gallons |
| Run Time | Up to 30 hours |
| Adjustable Mist Output | Yes |
| Auto Shut-off | Yes |
| Power Source | AC |
| Features | Quiet operation |
Loading...