Vicks VH200E User Manual (English)

Other manuals for Vicks VH200E

Questions and Answers:

A
annrichardsJul 25, 2025
What to do if my Vicks Vaporizer produces little to no mist?
- T
  Tina BennettJul 26, 2025
  If your Vicks Vaporizer is producing little to no mist, there are several possible causes: * The Water Reservoir may be empty. Ensure you fill it with water. * The unit might not be placed on a firm, level surface. Make sure it is. * Mineral deposits may have accumulated on the Heating Element. Try cleaning or disinfecting it. * The Water Reservoir may not have been rinsed thoroughly after washing. Empty the water and rinse it thoroughly with warm water.
B
Brittany KlineJul 30, 2025
How to fix a Vicks Vaporizer when the power light is off?
- J
  Jonathan JensenJul 30, 2025
  If the power switch on your Vicks Vaporizer is set to “on” but the Power Light is off, consider these possibilities: 1. The unit might not be properly plugged in. Ensure it is securely plugged into an outlet. 2. There may be no power at the outlet. Check the circuits and fuses, or try a different outlet to see if that resolves the issue.
B
Bill Valdez MDAug 5, 2025
Why is my Vicks Vaporizer water overflowing from the Water Reservoir?
- P
  Philip BallardAug 5, 2025
  The most likely reason for water overflowing from the Water Reservoir in your Vicks Vaporizer is that the unit has been filled above the maximum fill line. To resolve this, empty the unit, dry it, and then refill, being careful not to exceed the max fill line.
S
sgonzalesAug 9, 2025
What to do if my Vicks Medical Equipment inhaler produces little or no mist?
- N
  Nina DuranAug 9, 2025
  If your Vicks Medical Equipment inhaler isn't producing enough mist, or no mist at all, there are several potential causes: * The water reservoir may be empty. If so, fill the water reservoir. * The unit might not be on a firm, level surface. Ensure the inhaler is placed on a stable, even surface. * Mineral deposits could have accumulated on the heating element. In this case, clean or disinfect the heating element. * The water reservoir might not have been rinsed thoroughly after washing. Empty the water and rinse it thoroughly with warm water.
J
Joseph MorganAug 14, 2025
Why is the power light off on my Vicks Medical Equipment when the switch is on?
- R
  reyesmiguelAug 14, 2025
  If the power light is off when the power switch on your Vicks Medical Equipment is set to 'on', there could be a couple of reasons: * The unit might not be properly plugged in. Ensure the unit is plugged in securely. * There might not be power at the outlet. Check the circuits and fuses, or try plugging the unit into a different outlet.
R
Robert HendersonAug 19, 2025
What to do if water overflows from Vicks Medical Equipment Water Reservoir?
- A
  ashley24Sep 12, 2025
  If water is overflowing from the water reservoir of your Vicks Medical Equipment, it's likely because the unit has been filled above the maximum fill line. To resolve this, empty the unit, dry it, and then refill it, being careful not to exceed the max fill line.

Vicks VH200E Specifications

General

Brand	Vicks
Model	VH200E
Category	Medical Equipment
Language	English

Summary

Important Safety Instructions

Safe Use for Children and Supervision

Details guidelines for appliance use by children, emphasizing supervision for operation and maintenance.

Safe Operation and Placement

Provides critical advice on safe operation, including proper placement, disconnection, and avoiding movement during use.

Appliance Care and Surface Protection

Outlines essential care practices like handling damaged cords, regular cleaning, and protecting furniture from water damage.

First Time of Use

Initial Setup and Disinfection

Guides users through initial setup steps, including unpacking, disinfection, and selecting an appropriate operating location.

Operating Instructions

Filling the Water Reservoir

Instructions on unlocking the top housing, filling the water reservoir with the specified amount of water.

Power and Initial Operation

Guides on connecting the power, switching the unit on, and initial operation including steam production and usage time.

Adjusting Steam Output Levels

Explains how to adjust the steam intensity using the disk controls for optimal comfort and treatment.

Using VapoPads for Soothing Vapors

Provides instructions on how to use VapoPads for enhanced vapor therapy, including insertion and replacement.

Care and Cleaning Instructions

After Each Use Cleaning

Steps for cleaning the inhaler components after each session, including wiping and drying.

Weekly Deep Cleaning

Detailed instructions for a weekly deep clean using vinegar to maintain the unit's performance.

Cleaning Specific Components

Guidance on cleaning the mask, VapoPads tray, and notes on dishwasher safety for the top housing.

Storage and Disposal

Proper Storage Guidelines

Recommendations for storing the appliance after cleaning to ensure its longevity and safety.

Environmentally Responsible Disposal

Information on how to dispose of the appliance responsibly, adhering to EU regulations for recycling.

Trouble Shooting

Power and Indicator Light Issues

Troubleshooting steps for when the power switch is on but the power light is off.

Water Overflow Problems

Solutions for water overflowing from the reservoir, usually due to overfilling.

Mist Production Issues

Diagnosing and resolving problems with little or no mist production, including placement and cleaning.

Related product manuals

Vicks VH200E User Manual

Table of Contents