Vicks VH200 - User Manual

Questions and Answers

J
josephvaldezAug 8, 2025
What to do if my Vicks Medical Equipment inhaler produces little or no mist?
- R
  Rachel WalkerAug 8, 2025
  If your Vicks Medical Equipment inhaler isn't producing enough mist, or no mist at all, there are several potential causes: * The water reservoir may be empty. If so, fill the water reservoir. * The unit might not be on a firm, level surface. Ensure the inhaler is placed on a stable, even surface. * Mineral deposits could have accumulated on the heating element. In this case, clean or disinfect the heating element. * The water reservoir might not have been rinsed thoroughly after washing. Empty the water and rinse it thoroughly with warm water.
K
Kristin GonzalezAug 16, 2025
Why is the power light off on my Vicks Medical Equipment when the switch is on?
- B
  Benjamin ShepherdAug 16, 2025
  If the power light is off when the power switch on your Vicks Medical Equipment is set to 'on', there could be a couple of reasons: * The unit might not be properly plugged in. Ensure the unit is plugged in securely. * There might not be power at the outlet. Check the circuits and fuses, or try plugging the unit into a different outlet.
K
Krista PerryAug 27, 2025
What to do if water overflows from Vicks Medical Equipment Water Reservoir?
- G
  Gabriel SandersAug 27, 2025
  If water is overflowing from the water reservoir of your Vicks Medical Equipment, it's likely because the unit has been filled above the maximum fill line. To resolve this, empty the unit, dry it, and then refill it, being careful not to exceed the max fill line.