DISPLAY MESSAGES
The thermometer has been designed to display feedback messages to ensure
proper usage and accurate measurement. In the event of a malfunction or
incorrect measurement, the following messages will be displayed:
Cause
If the measured temperature is below
89.6°F (32.0°C) the display will indicate
“LO” (Fig. 10).
Cause
If the detected temperature is above
109.2°F (42.9°C) the display will indicate
"HI" (Fig. 11).
Cause
If there is a malfunction with the thermometer, the display
will show "Err" (Fig. 12). The unit will automatically power off
in 1 minute or you can turn the unit off by pushing the Power
( ) button. If Err message continues, please contact
Consumer Relations at 1-800-477-0457.
Fig. 10 Fig. 11
Fig. 12
13
To Next Page
Loading...
