Vicks recommends that for 15 minutes prior to use, avoid eating or
drinking any liquids, exercising, taking showers or baths, or smoking.
Remain still and quiet during measurement.
Accuracy of reading depends on the proper placement of the thermometer.
Use a new probe cover before each use.
Thermometer is to be turned off before attempting to
repeat process.There should be one minute intervals
between taking temperature.
The thermometer will automatically shut off in one minute
after use.
Operation Instructions:
1. Either pull out the probe from its holder or press the Power
( ) button until you hear one beep. All symbols and
number segments will be displayed and the backlight will
come on (Fig. 1).
2. Place a new probe cover on the probe (recommended).
3. The result of the previous reading will be displayed for 2
seconds (Fig. 2) along with the backlight. The “hourglass”
symbol ( ) indicates that the thermometer is preparing
for use (2-3 seconds).
DIRECTIONS FOR USE
Fig. 1
Fig. 2
8
To Next Page
Loading...
Need help?
General
