Need help?Do you have a question about the Vicpas UniOP BKDR-16 and is the answer not in the manual?
Details operating conditions, environmental factors, and electromagnetic compatibility standards.
Details specifications and pin assignments for PC/Printer, PLC, and AUX ports.
Provides panel dimensions, cut-out details, and mounting procedures.
Explains the power supply terminal block, wiring, and grounding requirements.
Details the step-by-step process for mounting the UniOP panels.
Describes battery replacement procedure and the meaning of dedicated LEDs.
Provides safety regulations, precautions, and environmental guidelines for operation.
Provides guidelines for safely handling and inserting memory cards.
Guides on initial setup, connecting the panel, and using the programming software.
Describes keyboard commands, operating modes, and data entry procedures.
Explains standard and emergency procedures for calibrating the touchscreen.
General| Display Type | TFT LCD |
|---|---|
| Touch Technology | Resistive |
| Touchscreen | Yes |
| Power Supply | 24 VDC |
| Resolution | 1024 x 768 pixels (XGA) |
| Connectivity | Ethernet |
| Communication Ports | RS-232 |
| Operating Temperature | 0°C to 50°C |
| Model | UniOP BKDR-16 |
To Next Page