Vicpas UniOP ePAD05 - User Manual

MANUUNIOP22- v.1.09 - 02.2012
UniOP
U n i v e r s a l O p e r a t o r P a n e l s
Ins t a l l a t i o n G u i d e

Summary

Technical Specifications

Environmental and EMC Specifications

Details operating conditions, humidity, vibrations, shock, protection, and electromagnetic compatibility.

Port and Internal Feature Specifications

Power Supply and Grounding

Power Supply and Grounding Requirements

Explains the correct procedure for connecting power and grounding the UniOP panel.

Communication Ports

PLC Port Configuration and Use

Describes the PLC port for communication with PLCs and its signal standards.

PC;Printer Port Configuration

Explains the PC/Printer port function, pin assignment, and connection for programming.

Battery Replacement

Replacing the UniOP Panel Battery

Usage and Safety Guidelines

Safety Regulations and Installation Environment

Covers applicable safety regulations and recommended installation environment conditions.

Getting Started with UniOP Panels

Programming and Setting Up UniOP Panels

Command Reference

General Commands and Touchscreen Keys

Mode-Specific Commands

Detailed Mode Command Functions

Advanced Command Mode Functions

Troubleshooting and Calibration

Troubleshooting Startup Problems

Provides steps to resolve issues preventing the panel from entering Configuration Mode.

Touchscreen Calibration Procedures

Details standard and emergency procedures for calibrating the panel's touchscreen.

Vicpas UniOP ePAD05 Specifications

General

Display Size	5.7 inches
Resolution	320 x 240 pixels
Touch Technology	Resistive
Power Supply	24 V DC
Communication Ports	RS-232, RS-485
Processor	32-bit RISC
Protection Rating	IP65 (front)
Operating Temperature	0°C to 50°C
Display Type	LCD
Serial Ports	1 x RS-232, 1 x RS-485