7 7
7 7
8
7. Unable to Connect (Continued)
Find the trap name
(Ex: VICTOR-WM170818BE00004) and select it.
Select “FORGET.”
Power trap off, then repeat steps 1 through 7. If the trap still does not connect, visit the
Trouble Shooting section or call 1-855-5-VICTOR for immediate assistance.
8. Name Your Trap
After successful connection, name the trap and press the red “Next” button.
9. Bait and Place Trap
Swipe through the three instruction screens on baiting and placing the trap, then press
the red “Done button. Visit the Frequently Asked Questions section for more information on
baiting and placing the trap.
To Next Page
Loading...