What to do if the strainer of Victorio VKP250 has become stuck?
If the strainer becomes stuck or jammed, making it hard to crank, try cranking the handle several times in reverse, then turn it forward again slowly. Repeat this process a few times. If the jam doesn't clear, disassemble the strainer and clean it out.
Why are skins and seeds getting into the sauce when using Victorio Kitchen Appliances?
Skins and seeds may get into the sauce if the strainer isn't properly assembled. Review the assembly instructions to ensure correct assembly. Small bits of skin or seeds may also pass through the holes in a coarser screen. If this occurs, consider using a finer screen.
What to do if seeds and skins coming out of Victorio VKP250 Kitchen Appliances are too wet?
If the seeds and skins coming out of the waste funnel are very wet and still contain juice or pulp, first, review the assembly instructions to be sure the strainer is properly assembled. You can also run the waste through again to retrieve more pulp. Avoid adding too much all at once to prevent jamming.
What to do if Victorio VKP250 Kitchen Appliances strainer gets stuck?
If your Victorio Kitchen Appliances strainer becomes jammed, especially with berries or grapes added too quickly, try cranking the handle a full turn in reverse, then forward slowly. Repeat a few times. If the jam doesn't clear, disassemble and clean the strainer. To prevent future jams, add these items a few at a time while cranking the handle.
What to do if skins and seeds get into sauce when using Victorio Kitchen Appliances?
If skins and seeds are getting into the sauce when using your Victorio Kitchen Appliances, first review the assembly instructions to ensure the strainer is properly assembled. Keep in mind that some small bits of skin or seeds may still get through the screen's holes.
What to do if my Victorio VKP250 strainer is jammed?
If the Victorio Kitchen Appliances strainer gets stuck or jammed, making it hard to crank, try cranking the handle in reverse several times, then turn it forward slowly. Repeat this process a few times. If the jam persists, you'll need to disassemble the strainer and clean it thoroughly.
What to do if juice is backing up into the hopper of Victorio Kitchen Appliances?
If the juice backs up into the hopper and doesn't go through the screen, it means the screen is clogged with pulp. Remove the squirt guard and scrape the pulp off the outside of the screen using a rubber scraper.
How to fix a hard to turn handle on Victorio VKP250?
Do not crank the handle while the food strainer is dry, as this can damage the screen and spiral. The handle is hard to turn because the strainer is empty. Once food is placed in the hopper and you begin straining, the handle will become easier to turn.
What to do if juice is backing up in Victorio VKP250?
If juice backs up into the hopper of your Victorio Kitchen Appliances and doesn't go through the screen, it's likely that the screen is clogged with pulp. Remove the squirt guard and scrape the pulp off the outside of the screen using the back of a knife blade.
What to do if seeds and skins coming out waste funnel are very wet in Victorio VKP250 Kitchen Appliances?
If the seeds and skins coming out of the waste funnel of your Victorio Kitchen Appliances are very wet and still contain juice or pulp, review the assembly instructions to be sure the strainer is properly assembled. You can also run the waste through again to retrieve more of the pulp. Be careful not to put in too much all at once to avoid jamming the strainer.
General| Product Name | Victorio VKP250 |
|---|---|
| Material | Stainless Steel |
| Features | Easy to clean |
| Operation | Manual |
| Color | Silver |
| Warranty | 1 Year |
Detailed list of all components included with the Victorio Food Strainer, identified by number and name.
Key features and specifications of the VKP250-M optional electric motor.
To Next Page
