12
ASEMBLE INSTRUCTION
The machine comes from the factory in a shipping configuration. Always use tools
equipment and forklifts of appropriate size and capacity for the job. Always use 2 men
when lifting, moving and assembling the machine.
When the machine is shipped, follow this procedure when preparing for the customer:
1. Clear the area of by standers especially small children before starting.
2. Use a forklift to lift the pallet/machine from the truck. Carry the load close to the ground.
3. Move the machine to the assembly area. Be sure there is sufficient clearance to
access the machine from all sides.
4. Take out the machine out of crate by forklift, unload it on the ground.
To Next Page
Loading...
