27
2. Thoroughly wash the machine with a pressure washer or water hose to remove all dirt, mud or
debris.
3. Inspect all rotating parts for entangled material. Remove all entangled material.
4. Run the machine a few minutes to dry the moisture from inside the machine.
5. Move the feed hopper up and lock.
6. Touch up all paint nicks and scratches to pre- vent rusting.
7. It is best to store the machine inside. If that is not possible, cover with a waterproof tarpaulin
and tie down securely.
8. Store in an area away from human activity.
9. Do not allow children to play around the stored unit.
REMOVING FROM STORAGE
When removing this machine from storage, follow this procedure:
1. Remove the tarpaulin if covered.
2. Review and follow the pre-operation checklist.
To Next Page
Loading...
