To Next PageTo Next Page
Need help?Do you have a question about the Victory VF-3 and is the answer not in the manual?
General| Brand | Victory |
|---|---|
| Model | VF-3 |
| Category | Refrigerator |
| Language | English |
Examine shipment packaging for damage upon arrival. Note damage on delivery slip and file claim.
Remove packaging. Never lay unit down; if done, allow 12 hours before start-up.
Consider clearance, floor load, and ventilation for optimal placement.
Screw casters/legs into threaded holes. Tilt and block cabinet to install all four.
Ensure cabinet is level to prevent door sealing or drainage issues.
Clean interior with mild detergent and water solution before use.
Insert shelf clips into pilasters, then place shelves on clips.
Wiring must be done by a qualified electrician per local codes. Ensure proper grounding.
Set thermostat for refrigerators (38-40°F) and freezers (-3-3°F).
Load food after unit reaches proper temperature, allowing 1.5" clearance.
Perform daily exterior and weekly interior cleaning using appropriate cleaners.
Clean condenser every three months (monthly if near cooking equipment) to ensure efficiency.
