EasyManua.ls Logo

Victrola VBB-25 - Radio and Wireless Operation; AM and FM Radio Tuning; Bluetooth Connectivity; USB and TF (Micro SD) Card Playback

Victrola VBB-25
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
RADIO OPERATION
BLUETOOTH / USB / TF (MICRO SD) OPERATION
SPECIFICATIONS
AM RADIO
1. For AM Radio, slide the function switch to AM.
2. Use the Tuning Knob to manually adjust the Radio to the desired station. For the best reception,
fully extend the antenna located on the top of the unit.
FM RADIO
1. For FM Radio, slide the function switch to FM.
2. Use the Tuning Knob to manually adjust the Radio to the desired station. For the best reception,
fully extend the antenna located on the top of the unit.
BLUETOOTH MODE
1. Slide the function switch to BT (Bluetooth) Mode.
2. Make sure your external device has the Bluetooth turned on. Then open the Bluetooth settings
menu on your device and select “VBB-25”. The Play LED Indicator will begin flashing.
3. The Play LED Indicator will stop flashing and an audible tone will sound, indicating the connection
was successful.
5. Use the silver playback buttons on the control panel as usual or control playback directly from your
external device.
6. To disconnect the external device, simply press the M (Mode) Button.
USB/TF (MICRO SD) MODE
1. Use the function switch to switch to BT (Bluetooth) Mode.
2. Insert a USB Thumb Drive or TF (Micro SD) Card (not included).
3. Press the M (Mode) Button until the unit starts playing music from the USB Thumb Drive or Card.
4. Use the silver playback buttons location on the control panel to control playback as usual.
5. The Repeat Button sets the Thumb Drive or Card on repeat. Press once to activate.
Note: The USB/SD ports only support MP3/WMA formats and a maximum of 32GB.
Note: In USB/BT mode, after 15 minutes of inactivity the unit will enter sleep mode.
To turn the unit back on, simply press the play button or move the function switch.
Product Weight.............................................................................2.25 lbs (1 kg)
Product Dimensions .....................................................................6.3 H x 9.8 W x 3.35 D
160mm H x 250mm W x 85mm D
Power Supply: ..............................................................................AC 120V~60Hz
Power: ..........................................................................................DC 6V / 4x C (UM2) Batteries
Radio Bands:................................................................................AM, FM
Frequency Range:........................................................................FM 87.5-108MHz / AM 520-1710KHz
Consumption Power.....................................................................4W
Speaker Output: ...........................................................................2.6W
Output Impedance........................................................................Speaker 6Ω
Bluetooth: .....................................................................................Version: V5.0
Radiation Power <1mW
Frequency Range: 2402~2480MHz
Design and specification are subject to change without notice.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Made in China.

Other manuals for Victrola VBB-25