Need help?Do you have a question about the Victron energy Phoenix 48/375 and is the answer not in the manual?
General| Model | Phoenix 48/375 |
|---|---|
| Input Voltage | 48 V |
| Output Voltage | 230 VAC |
| Output Power | 375 VA |
| Continuous Output Power at 25°C | 300 W |
| Output Frequency | 50 Hz |
| Zero Load Power Consumption in ECO mode | 2 W |
| Transfer Time | 20 ms |
| Operating Temperature | -20 to +50 °C |
| Protection | Output short circuit, Over temperature |
| DC Input Voltage Range | 38-66V DC |
Details battery capacity, fuse types, and recommended DC cable cross-sections for optimal performance.
Specifies the required wire size for grounding the inverter chassis to ensure electrical safety.
Warns against connecting the inverter output to another AC source like a wall outlet or generator.
Explains how to connect the inverter's neutral output to the chassis/ground for regulatory compliance.
Explains the meaning of the Green and Red LEDs, their status, and associated troubleshooting steps.
Explains various protection mechanisms like overload, low/high battery voltage, and high temperature.
To Next Page