Need help?Do you have a question about the Victron energy Phoenix 12/750 and is the answer not in the manual?
General| Model | Phoenix 12/750 |
|---|---|
| Input Voltage | 12 V |
| Output Voltage | 230 V AC |
| Continuous Output Power at 25°C | 750 VA |
| Output Frequency | 50 Hz or 60 Hz |
| Transfer time | 20 ms |
| Waveform | Pure sine wave |
| DC Input Voltage Range | 9.5 - 17 V |
| Protection | Output short circuit, Over temperature |
Safety guidelines for water, dust, wiring, and flammable materials near the inverter.
Measures to take when working with batteries, including acid contact and sparks.
Lists product features like sine wave output, efficiency, and protection mechanisms.
Details various uses for the inverter, from power tools to home entertainment electronics.
Visual representation of the inverter with key dimensions and connection points.
Explains front panel controls, indicators for voltage, load, and failure statuses.
Details rear panel connections, remote ON/OFF switch, and input terminal usage.
Covers installation environment, grounding, ventilation, and cable length advice.
Step-by-step guide for connecting, testing, and verifying inverter performance.
Essential information on AC safety grounding, neutral grounding, and GFCI requirements.
Instructions for correctly connecting DC battery cables, including wire gauge and fuse specs.
How to operate the inverter, its indicators, and input voltage operating ranges.
Identifies common problems like low voltage, overload, thermal shutdown, and their solutions.
Advice on keeping the inverter operational through periodic cleaning and terminal checks.
To Next Page